The Push-fit Soil system integrates with Brett Martin Push-fit Waste and Underground drainage systems. Comprehensive, integrated and modern range of products and systems for all soil and waste applications. In addition if the term “ABS” is printed on the pipe this identifies the pipe as solvent weld waste pipe. This solvent weld boss adaptor is used in conjunction with either an SP583 Short Boss Pipe, an SP581 boss pipe or an SP319 strap boss to connect a waste pipe into a 110mm soil pipe.

The three options are as follows – 32mm Solvent Weld Pipe actually measure 1 1/4 inchs or 36mm, 40mm Solvent Weld Pipe actually measure 1 1/2 inchs or 43mm, 50mm Solvent Weld pipe actually measure 2 inchs or 56mm. Manufactured in PVC-U with push-fit joints through an innovatively designed seal and snap cap system. Manufactured by Brett Martin, the 110mm Soil Pipe 50mm Solvent Weld Boss Adaptor provides an easy to install solution for joining smaller soil pipes exiting a property with the main vertical soil pipe. Note: Polypipe soil and waste systems are suitable for short intermittent discharges of hot and cold water in normal domestic installations in the UK.

Solvent weld boss adaptor for Short boss pipe, strap boss or access fittings to reduce down and connect to soil waste systems. and 160mm diameter systems, manufactured to BS EN 1329:2000 and are fully compatible with other systems. Soil and Waste systems may be used to carry liquids when subjected to a continuous flow, with a maximum temperature of 76°C. They are used only by Carboclass Ltd or our trusted partners, where they are used for marketing, statistics, and personalised ads.

Generally, water can be run through a solvent bonded joint within 20-30 minutes – but if possible, it’s best practice to leave your system 24 hours before testing. Products are available in multiple colours (grey, black, white and rustic brown) with system going up to 160mm (6”) for the soil stacks. Compatible with most other existing materials and systems manufactured to British/European Standards. EMS 538445 All products are subject to continuous quality control procedures and products manufactured to British Standard Specifications are marked accordingly.FloPlast offer a comprehensive choice of systems and products, in a range of sizes and colours, to suit all tastes and applications. The off-centre nature of the adaptor allows it to be rotated before the solvent weld is created – so you can align your vent pipes neatly. The Polypipe solvent weld waste ABS 50mm range performs at higher operating temperatures than other waste systems and is robust enough to withstand high impacts. All our products are manufactured to the highest standards and comply with all current UK and European standards. FloPlast operates quality and environment management systems which have been assessed by BSI and comply with the requirements of both BS EN ISO 9001:2008 Certificate No.